- Linac Magnetrons
- Marine Magnetrons
- Thyratrons
- Solid state modulators
- Circulators
- Limiters
- Front Ends
- Other parts
Frequency: 2993-3002 MHz
Peak Power: 2600 kW
Frequency: 2993-3002 MHz
Peak Power: 2000 kW
Frequency: 2993-3002 MHz
Peak Power: 2000 kW
Frequency: 2993-3002 MHz
Peak Power: 2000 kW
Frequency: 2992-3001 MHz
Peak Power: 2600 kW
Frequency: 2852-2861 MHz
Peak Power: 5500 kW
Frequency: 2993-3002 MHz
Peak Power: 3100 kW
Frequency: 2852-2861 MHz
Peak Power: 5500 kW
Frequency: 2993 – 3002 MHz
Peak Power: 3100 kW
Frequency: 2998 MHz
Peak Power: 7500 kW
Water Cooled electromagnet
Used with: MG5193, MG5125, MG5125P
Water cooled electromagnet
Used with: MG5349, MG6090
Water cooled electromagnet
Used with: M5028, MG6028
Waveguide Transition
Used with: MG5193, MG5125, MG5125P
Water cooled electromagnet
Used with: MG6493
Capacitor
Used with: M5028, MG6028
Filament Lead Varian
Filament Lead Siemens
Peak Anode Voltage: 40 kV
Peak Current: 3 kA
Peak Anode Voltage: 35 kV
Peak Current: 3 kA
Peak Anode Voltage: 25 kV
Peak Current: 1 kA
Replacement for the 8503AG
Peak Anode Voltage: 20 kV
Replacement of the 8503B
Peak Anode Voltage: 20 kV
Peak Anode Voltage: 25 kV
Peak Current: 1 kA
Peak Anode Voltage: 25 kV
Peak Current: 1 kA
Replacement of the CX1140LE
Peak Anode Voltage: 33 kV
Replacement of the CX1159
Peak Anode Voltage: 33 kV
Peak Anode Voltage: 16 kV
Peak Current: 0.4 kA
Peak Anode Voltage: 35 kV
Peak Current: 1.5 kA
Peak Anode Voltage: 33 kV
Peak Current: 1 kA
Peak Anode Voltage: 35 kV
Peak Current: 5 kA
Used with: CX1140, CX1140A, CX1140LE, CX1159
Used with: CX1140, CX1140A, CX1140LE, CX1159
Used with: CX1140, CX1140A, CX1140LE, CX1159
Used with: CX1140, CX1140A, CX1140LE, CX1159
Used with: CX1140, CX1140A, CX1140LE, CX1159
Used with: 8503B, 8503AG, CX1191D
Used with: 8503B, 8503AG, CX1191D
Used With: 8503B, 8503AG, CX1191D
Used with: CX1140, CX1140A, CX1140LE, CX1159, CX1191D
The MPT Series is a range of fully integrated, compact, direct switching, high voltage solid-
The MPT Series is a range of fully integrated, compact, direct switching, high voltage solid-
Marine magnetrons from 1.5 – 25 KW at a frequency range between 9345 – 9680 MHz.
Marine magnetrons from 10 – 60 KW at a frequency range between 3010 – 3090 MHz.
Magnetrons for Coastal Surveillance radars, Vessel Traffic Systems and Ground Movement radars on..
Compatible marine magnetrons from 4 – 10 kW at a frequency between 9380 – 9440 MHz.
e2v technologies manufacture Ferrite Devices operation from 350 MHz to 120 GHz, for a wide variety of applications from low cost marine radar to state-of-the-art military devices. Standard units are available in regular waveguide sizes and some special sizes.
e2v technologies offer circulators and isolators as stand-alone units and also as part of an integrated microwave package. They all come with the assurance that e2v technologies have facilities to power test units, giving confidence in all devices.
Guide your signal to transmitter or antenna
You can use the circulator to prevent a mix-up of the signals. The operation of a circulator can be compared to a revolving door with three entrances and one mandatory rotating sense. A microwave signal entering via one specific entrance follows the prescribed rotating sense and has to leave the circulator via the next exit. If an antenna is in a connection, transmitting energy is always escorted to the antenna while the echo signals always find the way to the receiver.X-Band circulators
S-Band circulators
e2v technologies manufacture a broad range of receiver protectors in all radar frequency bands from 1.25 to 40 GHz. The high power waveguide devices specified below are divided into two categories:
- Solid state receiver protectors that normally require synchronous bias during transmission; additional passive protection can often be included
- Passive limiters that require no external bias
Extra options for your limiter
PIN switches can be supplied:- with or without electronic drive circuit
- with drive circuit and built-in test (BIT)
- with quasi-active circuits fot interpulse protection
- with pre-TR tubes for high peak power fault conditions
- with phase and amplitude matching
- additional filtering >to attenuate spurious transmissions or extend protection range
- precision dynamic attenuation (STC), digital or analogue
- solid-state noise generators for inter-pulse performance monitoring
X-Band limiters
S-Band Limiters
Use a front-end as a radar component and you can receive S- and X-band frequencies ranges with one application.
Efficiency in use of the EEV radar system
e2v technologies Ltd. developed these components to make it posssible to receive signals from both the S- and X-band frequency ranges, instead only one of them.X-Band Front Ends
S-Band Front Ends